Owner`s manual
America’s Leader In Luxury
MASTER SPAS
44
MASTER SPA - LEGEND SERIES - LSI 557
Diagnostic Messages (cont.)
Message
dr
dr4
Pr
--
Std
Ecn
SE
SLP
Sby
PHL
PHH
SAL
SAH
Meaning
Inadequate water detected in heater.
Inadequate water detected in heater.
(Displays on third occurrence of "dr"
message.) Spa is shut down.
When your spa is first actuated,
it will go into Priming mode.
Temperature not yet known.
The spa is operating in Standard Mode.
The spa is operating in Economy Mode.
The spa is operating in
Standard-in-Economy Mode.
Sleep Mode has been activated by
pressing a button combination on the
user panel.
Standby Mode has been activated by
pressing a button combination on the
user panel.
pH is low.
pH is high.
Sanitizer is low.
Sanitizer is high.
Action Required
Check water level in spa. Refill if necessary.
If the water level is okay, make sure the pumps
have been primed. Check for a dirty filter and
clean if necessary. Press any button to reset.
Follow action required for "dr" message. Spa will
not automatically reset; you may press any button
to reset.
The Priming mode will last for up to 4 minutes
and then the spa will begin to heat and maintain
the water temperature in the Standard mode.
This is normal within the first few minutes of the
spa power-up.
Temperature display is current after pump has
been running for at least 2 minutes.
"Ecn" will appear solid on the display when the
temperature is not current. "Ecn" will alternate
with the temperature when the temperature is
current.
Operates the same as Standard mode, then reverts
to Economy mode after 1 hour. Press "Mode" to
switch directly to Economy Mode.
"SLP" will appear solid on the display when the
temperature is not current. "SLP" will alternate
with the temperature when the temperature is
current.
Press any button to leave Standby mode and
return to normal operation.
Add pH increaser according to manufacturer’s instructions.
Add pH decreaser according to manufacturer’s instructions.
Add sanitizer according to manufacturer’s instructions.
Remove spa cover and allow sanitizer to dissapate.