Owner`s manual

America’s Leader In Luxury
MASTER SPAS
41
MASTER SPA - LEGEND SERIES - LSI 557
Standard mode maintains the desired temperature. Note that the last measured
spa temperature displayed is current only when the pump has been running for at
least 2 minutes. "Std" will appear on the display momentarily when you switch
into Standard Mode.
Economy mode heats the spa to the set temperature only during filter cycles.
"Ecn" will appear solid when the temperature is not current and will alternate
with the temperature when the temperature is current.
Pressing "Jets 1" while in Economy mode puts the spa in
Standard-In-Economy mode, ("SE") which operates the same as Standard
Mode, then reverts to Economy Mode automatically after 1 hour. During this
time, pressing "Temp" followed by "Light" will revert the mode to Economy
immediately.
Sleep mode heats the spa to within 20˚F (11˚C) of the set temperature only
during filter cycles. "SLP" will appear on the display until mode is changed.
Standby Mode
Pressing "Temp" followed by "Blower" or "Jets 2" or "Aux" will turn off all spa
functions temporarily. This is helpful when changing a filter. Pressing any button
exits Standby mode.
Jets 1
Press the "Jets 1" button once to turn pump 1 on or off, and to shift between low
and high speeds (if equipped). If left running, the low speed turns off after 2
hours and the high speed turns off after 15 minutes. *
On non-circ systems, the low speed of pump 1 runs when the blower or any
other pump is on. It may also activate for at least 2 minutes every 30 minutes to
detect the spa temperature (polling) and then to heat to the set temperature if
needed, depending upon mode.When the lwow speed turns on automatically, it
cannot be deactivated from the panel; however, the high speed may be started.
*15-minute timeouts may be changed to 30 minutes and 2-hour timeouts may be
changed to 4 hours. • Consult your dealer for more information.