Owner`s manual

America’s Leader In Luxury
MASTER SPAS
33
MASTER SPA - LEGEND SERIES
Mode/Program
This button is used to switch between standard, economy, and sleep modes.
Press "Mode/Program" to enter mode programming, press "Cool" to cycle
through to desired mode (LCD flashed until confirmed), then press
"Mode/Program" to confirm selection.
Standard mode maintains the desired temperature. Note that the last measured
spa temperature displayed is current only when the pump has been running for at
least 2 minutes. The "STANDARD" icon will display until the mode is changed.
Economy mode heats the spa to the set temperature only during filter cycles.
The "ECONOMY" icon will display until mode is changed.
Pressing "Jets 1" while in Economy mode puts the spa in
Standard-In-Economy
mode, which operates the same as Standard Mode, then reverts to Economy
Mode automatically after 1 hour. During this time, a press of the "Mode/Prog"
button will revert to Economy Mode immediately.
Sleep Mode heats the spa to within 20˚F (11˚C) of the set temperature only
during filter cycles. The "SLEEP" icon will display until mode is changed.
Standby Mode
Pressing "Warm" or "Cool" then "Jets 2" will turn off all spa functions
temporarily. This is helpful when changing a filter. Press any button to exit
Standby mode.
Jets 1
Press the "Jets 1" button once to turn pump 1 on or off, and to shift between low
and high speeds. If left running, the low speed turns off after 2 hours and the
high speed turns off after 15 minutes. *
Note: Jets 2 and Jets 3 not available on 557 LSI model.
Jets 2
Press the "Jets 2" button once to turn pump 2 on or off, and to shift between low
and high speeds. If left running, the pump will turn off after 15 minutes. *
Jets 3
Press the "Jets 3" button once to turn pump 3 on or off. If left running, the
pump will turn off after 15 minutes. *
*15-minute timeouts may be changed to 30 minutes and 2-hour timeouts may be
changed to 4 hours. • Consult your dealer for more information.