Owner`s manual

America’s Leader In Luxury
MASTER SPAS
71
REGULAR MAINTENANCE PROCEDURES
REPLACING YOUR LIGHT BULB
If your light bulb goes out,it is very easy to replace.
Use a 12 volt,6 watt bulb that should be available through your dealer.
First, make sure the power to the spa is off.You can access the spa light fitting
by removing the spa panel.
Once the panel is removed,unfasten the black fitting inside the white
light assembly, by turning it counter clockwise.
Attached to the black fitting is the light bulb.Replace the bulb and reinsert
the fitting,by turning it clockwise.
If the white lens cap needs to be removed,insert a flat head screw driver as
shown in the picture below.
This may also be necessary when installing
an LED light.