Owner`s manual

America’s Leader In Luxury
MASTER SPAS
33
MASTER SPA - LEGEND SERIES
Setting the Time
Once the spa has been properly connected the first time,
notice the "Time" icon appearing on the screen.
Press Then
Select the hour by pressing or
(Each press changes the time by 1 hour)
Press to enter.
Select minutes by pressing or
(Each press changes the time by 1 hour)
Press to exit the time setting procedure and enter the
optional filter cycle programming.
Press to exit programming.
Optional Filter Cycle Programming
You are not required to set filter cycle;however,it is an option available to you.
To change the filter cycle settings:
Press “Time”“Program/Mode”“Program/Mode”“Program/Mode” within 3
seconds.You will see the “PROGRAM,”“FILTER 1”and “START TIME”icons
appear on the display.
Press “Warm”or “Cool” to choose the filter start time hour.Enter the hour by
pressing “Program/Mode”. Press “Warm” or “Cool” to choose the filter start time
minutes.Each press changes the start time by 5 minutes.
Enter the minutes by pressing “Program/Mode.”
Press “Program/Mode” to see the “PROGRAM,”“FILTER 1”and “END TIME”
icons.Adjust the time as done above.
Press “Program/Mode” to see the “PROGRAM,”“FILTER 2”and “START TIME”
icons.Adjust the time as done above.
Cont.page 34