Specifications

POWER REQUIRMENTS

An illustration showing the proper electrical connections for 240 volt service has been provided for

you. (Figure 2) Be sure to follow these and all other instructions carefully. Be sure that all

connections are tight before switching on the circuit breaker.

CAUTION! Failure to abide by specification listed may result in damage to equipment and may void

the warranty. IF THE SPA IS WIRED INCORRECTLY, YOUR WARRANTY WILL BE VOID ON

ANY BURNED OUT ELECTRICAL EQUIPMENT.

G.F.C.I (Ground Fault Circuit Interrupter)

IMPORTANT

This service must be single phase. High voltage can seriously injure or kill. Always use a certified

electrician when connecting new spa.

The National Electrical Code states that a service disconnect breaker box (a G.F.C.I. can be used

for this purpose) must be located at least 5 feet away from the spa and should be conveniently

located near the equipment bay. If it is not in plain sight, keep the disconnect padlocked when in the

off position.

Remember, high voltage is still accessible in the housebreaker box even though you have turned off

the spa breaker.

G.F.C.I HOOK - UP

Figure 2

G.F.C.I

CONDUIT

HS2000VS

See Page 5

Figure 4

NEUTRAL/GROUND

BAR

INPUTS FROM

TRANSFORMER