Owner`s manual

REGULAR MAINTENANCE PROCEDURES

Note: These are maintenance procedures are the responsibility of the spa

owner to perform. These procedures are not covered by the spa warranty.

CLEANING JETS

The majority of jets in your spa can individually be

turned on/off. If any of these jets become hard to

turn, it will be necessary to remove the jet to clean

it as grit/sand and mineral deposit may be present.

Jets are removed by turning the collar and then pull-

ing out the jet. The jets in your spa can be removed

for cleaning by unscrewing them (counter clockwise)

and then pulling out the jet. Some jets may not be removable depending on

the model.

TO CLEAN JETS

Place the jet(s) in a bucket, fully immerse in white vinegar. Let the jet(s) soak

overnight and then rinse with water. Reinstall the jet(s). It may be necessary to

clean grit and deposits from the white jet body (mounted in the spa shell) by

using a small bristled brush.

DRAINING YOUR SPA

The drain is located behind the front panel on the far

right side, grasp the hose bib cap and turn it counter

clockwise. Attach a garden hose, if desired. Turn the black

knob on the side of the valve a quarter turn. Draining

times may vary by model using the external hose bib.

A sump pump may also be used to drain the spa quickly.