Owner`s manual

____________________________________________________________________________________________

__________________________________________________________________________________________

WATER

WATERWATER

WATER

QUALITY

QUALITYQUALITY

QUALITY

MAINTENANCE

MAINTENANCEMAINTENANCE

MAINTENANCE

SCHEDULE

SCHEDULESCHEDULE

SCHEDULE

♦ EVERY DAY – filter the spa a minimum of 4-6 hours. If the spa is equipped with 24

hour circulating pump, you will not need to adjust filter time.

♦ BEFORE EACH USE – Add 1 tablespoon of non-chlorine shock to spa per 250 gallons.

♦ ONCE A WEEK – Add 3 Tablespoons of a non-chlorine shock or 1 teaspoon of Dichlor

to spa per 250 gallons.

♦ 3 TIMES A WEEK – Test water using chemical test strips. Adjust sanitized, pH and

Alkalinity accordingly.

♦ ONCE A MONTH – Soak your filter element overnight in a bucket with spa Filter

Cleaner and then rinse with clean water before re-inserting. (The ECO PUR® mineral

element should never be cleaned in a filter cleaner. Just rinse with water.)

♦ EVERY 180 DAYS – Drain and refill your spa, replace the ECO PUR® element, repeat

start up procedure.

♦ AS NEEDED – If water looks hazy, shock treat with 1 teaspoon of Dichlor per 250

gallons.

Note: As an alternative to non chlorine shock, Dichlor may be substituted.

1 tsp. Dichlor = 3 tablespoons of non chlorine shock

USE ONLY SPA CHEMICALS (some pool chemicals are not suitable for spa use).