Owner`s manual

____________________________________________________________________________________________
__________________________________________________________________________________________
17
LCD
LCDLCD
LCD ERROR
ERRORERROR
ERROR INDICATOR
INDICATORINDICATOR
INDICATOR
Your LCD will readout the following if any problems are detected:
MESSAGE MEANING ACTION REQUIRED
No message on display. The control panel will be disabled until
Power has been cut off to power returns. Spa settings will be
the spa preserved for 30 days with a battery
back-up.
- - Temperature unknown. After the pump has been running for 2
minutes, the temperature will be displayed.
HH “Overheat” – The Spa has DO NOT ENTER THE WATER.
shut down. One of the Remove the spa cover and allow water to
sensors has detected 118°F cool. Once the heater has cooled, reset by
at the heater. Pushing any button. If spa does not reset,
shut off the power to the spa and call your
dealer or service organization.
OH “Overheat” – The Spa has DO NOT ENTER THE WATER.
shut down. One of the Remove the spa cover and allow water to
sensors has detected 110°F. cool. At 107°F, the spa should
automatically reset. If spa does not reset,
shut off the power to the spa and call your
dealer or service organization.
IC “Ice” – Auxiliary Freeze No action required. The pump(s) will
Sensor detects potential automatically activate regardless of spa
Freeze condition. status.
Cd “Cold Water” Temperature No action required. Freeze protection has
sensors detect a potential initiated as described above. (If pump was
freeze condition. turned on due to this reason alone, this
message will appear for up to two minutes
right after very cold water is sensed.)
SA Spa is shut down. The If the problem persists, contact your dealer
sensor that is plugged or service organization. (May appear
into the Sensor “A” jack temporarily in an overheat situation and
is not working. disappear when the heater cools.)
Sb Spa is shut down. The If the problem persists, contact your dealer