Owner`s manual

____________________________________________________________________________________________
__________________________________________________________________________________________
16
Note: Spas equipped w/circ pump will only purge for 5 minutes 2 times a day as circ
pump will perform filtration. The filter cycle duration settings will be redundant.
TO PROGRAM FILTER CYCLE:
• Press “Temp”
• Then press the first “Jets” button to the right of display
• Press “Temp” to adjust hours
• Then press the first “Jets” button to the right of the display to exit
SPA
SPASPA
SPA LIGHT
LIGHTLIGHT
LIGHT
The button labeled “Light” controls the spa light. Press the pad once for “on” and again
for “off.” The light will automatically shut off after FOUR hours. To reactivate, simply
press the button again.
OZONE
OZONEOZONE
OZONE SYSTEM
SYSTEMSYSTEM
SYSTEM -
--
- STANDARD
STANDARDSTANDARD
STANDARD ON
ONON
ON CIRC
CIRCCIRC
CIRC SYSTEM
SYSTEMSYSTEM
SYSTEM
(OPTIONAL
(OPTIONAL(OPTIONAL
(OPTIONAL ON
ONON
ON NON
NONNON
NON CIRC
CIRCCIRC
CIRC SYSTEM)
SYSTEM)SYSTEM)
SYSTEM)
Your ozone system will operate whenever the spa is in its normal filtration cycle. On
non circ models, Ozone will not operate when a pump button is manually pressed.
STEREO MODELS AVAILABLE ON THE
STEREO MODELS AVAILABLE ON THE STEREO MODELS AVAILABLE ON THE
STEREO MODELS AVAILABLE ON THE EAST HAMPTON/PORTSMOUTH/
EAST HAMPTON/PORTSMOUTH/EAST HAMPTON/PORTSMOUTH/
EAST HAMPTON/PORTSMOUTH/
WINDSOR
WINDSORWINDSOR
WINDSOR/E
/E/E
/EXETER
XETERXETER
XETER/
//
/CAPE COD
CAPE CODCAPE COD
CAPE COD (2 pump Systems)
(2 pump Systems) (2 pump Systems)
(2 pump Systems)
Refer to the Sony’s Stereo Operations Manual enclosed in your Owner’s Manual Packet.
MODE
MODEMODE
MODE
Mode is changed by pressing the “Temp” button, then pressing the “Light “button.
Standards Mode is programmed to maintain the desired temperature. Note that the last
measured spa temperature displayed is current only when the pump has been running for
at least 2 minutes. “St” will be displayed momentarily when you switch into Standard
Mode.
Economy Mode heats the spa to the set temperature only during filter cycles. “Ec” will
display solid when temperature is not current, and will alternate with temperature when
temperature is current.
Sleep Mode heats the spa to within 20° F of the set temperature only during filter cycles.
“SL” will display solid when temperature is not current, and will alternate with
temperature when temperature is current.