Operating instructions

3 Functions Issue 10/06
MICROMASTER 420 Operating Instructions
42 6SE6400-5AA00-0BP0
Attribute
group
Attribute Description
This attribute is only of importance in conjunction with a BOP. The "Immediate"
attribute indicates that this value is already accepted when scrolling (when changing
the value with
or ). Especially parameters which are used for optimization
functions have this property (e.g. constant voltage boost P1310 or filter time
constants). On the other hand, for parameters with the attribute "After actuation", the
value is only accepted after first actuating the key
. These include, for example,
parameters where the parameter value can have different settings/meanings (e.g.
selecting the frequency setpoint source P1000).
Immediately
The value becomes valid by either scrolling with
or
Active
After
actuation
The value is only accepted by pressing
The attributes and groups are shown, in the parameter list, in the header line of the
parameter. This is shown as an example in Fig. 3-2 using parameter P0305.
Rated motor current
0.01
C
Float A 3.25
10000.00
1
P0305[3]
CStat:
P-Group:
Datatype:
Active:
Unit Def:
Max:
Min:
Group Wertebereich
BICO (if exist)
Access level
Index
MOTOR first confirm
Level:
QuickComm.Yes
CStat
Active
Datatype
QuickComm.
Unit
Parameter number
Parameter text
Fig. 3-2 Header line for parameter P0305