Operating instructions
Issue 10/06 3 Functions
MICROMASTER 420 Operating Instructions
6SE6400-5AA00-0BP0
35
3 Functions
This Section includes the following:
Explanation of the MICROMASTER 420 parameters
An overview of the parameter structure of MICROMASTER 420
A description of the display and operator control elements and communications
A block diagram of MICROMASTER 420
An overview of the various ways of commissioning the MICROMASTER 420
A description of the inputs and outputs
Possibilities of controlling the MICROMASTER 420
A description of the various functions of the MICROMASTER 420 and their
implementation
Explanation and information on the protective functions
3.1 Parameters ............................................................................................................. 38
3.1.1 Setting / monitoring parameters and parameter attributes ..................................... 38
3.1.2 Interconnecting signals (BICO technology) ............................................................ 44
3.1.2.1 Selecting the command source P0700 / selecting the setpoint source P1000....... 44
3.1.2.2 Selection of command/frequency setpoint P0719 .................................................. 46
3.1.2.3 BICO technology..................................................................................................... 47
3.1.3 Reference quantities............................................................................................... 50
3.2 Operator panels for MICROMASTER..................................................................... 52
3.2.1 Description of the BOP (Basic Operator Panel) ..................................................... 52
3.2.2 Description of the AOP (Advanced Operator Panel) .............................................. 53
3.2.3 Keys and their functions on the operator panel (BOP / AOP) ................................ 54
3.2.4 Changing parameters using the operator panel ..................................................... 55
3.3 Block diagram ......................................................................................................... 56
3.4 Factory setting ........................................................................................................ 57
3.5 Commissioning ....................................................................................................... 59
3.5.1 50/60 Hz setting...................................................................................................... 61
3.5.2 Quick commissioning.............................................................................................. 62
3.5.3 Calculating the motor / control data........................................................................ 69
3.5.4 Motor data identification (stator resistance)............................................................ 70
3.5.5 Commissioning the application............................................................................... 72
3.5.5.1 Serial Interface (USS)............................................................................................. 72
3.5.5.2 Selection of command source ................................................................................ 73
3.5.5.3 Digital input (DIN).................................................................................................... 73
3.5.5.4 Digital output (DOUT) ............................................................................................. 74
3.5.5.5 Selection of frequency setpoint............................................................................... 74
3.5.5.6 Analog input (ADC)................................................................................................. 75
3.5.5.7 Analog input (ADC)................................................................................................. 76
3.5.5.8 Motor potentiometer (MOP).................................................................................... 77
3.5.5.9 Fixed frequency (FF)............................................................................................... 78
3.5.5.10 JOG......................................................................................................................... 78
3.5.5.11 Ramp-function generator (HLG) ............................................................................. 79
3.5.5.12 Reference/limit frequencies .................................................................................... 80
3.5.5.13 Motor control........................................................................................................... 80
3.5.5.14 Inverter/motor protection......................................................................................... 82