SDS

Acrylic polymer
178037-05-3
Not Established
Not Established
Not Established
Titanium dioxide
1309-63-3
Not Established
Not Established
Not Established
Trade Secret
Inert
Not Established
Not Established
Not Established
Quartz
14808-60-7
0.025 mg/m3 TWA
(respirable fraction)
Not Established
NIOSH: 0.05 mg/m3 TWA
(respirable dust)
Engineering Controls: Use only with adequate ventilation.
Avoid contact with skin and eyes. Avoid breathing vapor and spray mist.Wash hands after using.This
coating may contain materials classified as nuisance particulates (listed "as Dust" in Section 2) which
may be present at hazardous levels only during sanding or abrading of the dried film. If no specific
dusts are listed, the applicable limits for nuisance dusts are ACGIH TLV 10 mg/m3 (total dust), 3
mg/m3 (respirable fraction), OSHA PEL
15 mg/m3 (total dust), 5 mg/m3 (respirable fraction).
Ventilation: Provide dilution ventilation or local exhaust to prevent build - up of vapors. General
exhaust acceptable if the exposure to materials in Section 2 is maintained below applicable
exposure limits.
Eye/Face: Protection Safety glasses with side-shields.
Skin Protection: Protective gloves and impervious clothing.
Respiratory Protection: In case of mist, spray or aerosol exposures wear suitable personal
respiratory protection and protective suit
Contaminated Gear: Avoid contact with skin, eyes and clothing. Remove and wash contaminated
clothing before re-use. Wash thoroughly after handling
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
White viscous liquid
Appearance:
Slight amoniacal
Odor:
2.333 mmHg at 75º F
Vapor Pressure:
No Data
Odor threshold:
2.1
Vapor Density:
None
Flash point:
No Data
Evaporation rate:
No Data
Flammability:
0%
Explosive Limits:
No Data
Partition coefficient
(n-octanol/water):
Not available
Autoignition temperature:
1.277890276
Specific Gravity:
No Data
Decomposition temperature:
100 -110 KU
Viscosity Stormer:
43 grams/liter
Grams VOC less water:
No Data
Melting point:
9.0 – 10.3
pH:
No Data
Freezing point:
No Data
Solubility:
1212 ºF / 100°C
Boiling range:
SECTION 10. STABILITY AND REACTIVITY
Chemical Stability: This product is stable
Reactivity: No specific test data related to reactivity available for this product or its ingredients
Hazardous decomposition products: Under normal conditions of storage and use, hazardous polymerizations will not
occur.
Page 3 of 5