SDS

SAFETY DATA SHEET
SDS MASTERFLEX REFLECTIVE Page 2 of 10
Safety precautions have been read and understood. Wear protective gloves.
Wear eye or face protection. Wear protective clothing. Keep out of reach of
children.
Response: Wash hands after handling. If exposed or concerned, get medical
attention
Storage: Store locked up in a dry and well ventilated environment.
Disposal: Dispose of contents and container in accordance with all local, regional, national
and international regulations.
Hazard(s) not otherwise
Classified (HNOC): None known.
Supplemental information: None.
Section 3. Composition / information on ingredients
Substance / mixture: Mixture.
Other means of identification: Not available.
CAS number /other identifiers
Ingredient name
Cas Number
Weight maximum concentration %
Titanium Dioxide
13463-67-7
10.00
Limestone
1317-65-3
30.00
Modified acrylic polymer
Supplier trade secret
50.00
Water
7732-18-5
10.00
The exact composition and percentage (concentration) has been withheld as a trade secret in order to protect confidentiality
or is due to batch variation.
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations
applicable, are classified as hazardous to health and hence require reporting in this section.
Section 4. First aid measures
Description of necessary first aid measures
Eye Contact: Immediately flush eyes with plenty of water. Occasionally lifting the upper and
lower eyelids. Check for and remove any contact lenses. Continue to rinse for at
least 10 minutes. Get medical attention.
Inhalation: If breathing is difficult, remove to fresh air and keep at rest in a position
comfortable for breathing. Call a physician if symptoms develop or persist.
Skin Contact: Immediately flush with plenty of water for at least 15 minutes while removing
contaminated clothing and shoes. Wash off with soap and plenty of water. Seek
immediate medical attention.
Ingestion: Wash out mouth with water. Remove dentures if any. Remove victim to fresh air
and keep at rest in a position comfortable for breathing. If material has been