Welded Wire Kennel Assembly Instructions Parts List: 7 Kennel Panels 1 Kennel Gate Panel P re-sssembled) 1 Gate Latch Assembly {Latch, Back plate, U-bots w/Wing Nuts) 18 Panel Clamps, 2pc. w/Bolts & Wing Noels 12 Roof Cover Lunges Cords 1 Roof Cover 2 Roof Truss Frames 1 Ridge Pole 2 Ridge Pol Clamps w/Bolts & Wing Nuts 1. Unpack parts and be sure you have all hardware prior o number st the bottom of the page If you have missing or damaged pairs} 2. Layout panels in configuration shown {Fig. 1}.
