Product Manual

5
Spray Gun Clips
Front Deflector Nozzle Attachment
Locate the Spray Gun Clips in the bag marked GC-100-
Kit. These clips are used to hold the Spray Gun to the
Cart. The Clips can be mounted on the tank or on the
Upper Handle.
When mounting to the Upper Handle, Insert the 10-24 x
1” screws through the Clips and then the hole located in
the Flat Bar of the Hose Wrap on the Handle Upright (as
shown). Fasten using the 10-24 Nyloc nuts and tighten.
When mounting the Clips to the Tank, insert the 10-24 x
½” screws through the Clip and then into the Tank.
Tighten firmly.
Locate the bag labeled Nozzle Assembly. Insert Nozzle
Body Fitting (6) through the Nozzle Bracket (5), and
hold in place with the Nozzle Body Nut (4) tightened
loosely by hand.
Insert Nozzle Filter (3) into Nozzle Body in orientation
shown. Place Deflector Nozzle (2) into Nozzle Nut (1).
Thread Nozzle Nut with Deflector onto Nozzle Body
Fitting and tighten slightly.
Locate the Clear Hose under the Tank and attach to the
Nozzle Body Fitting with a Hose Clamp.
Attach Nozzle Bracket to Tank with 10-24 x ¼”
screws.
Tighten all nuts and screws securely, ensuring the
Deflector Nozzle is aimed directly down towards the
ground.