Product Manual

3
ASSEMBLY
The Master Gardner is assembled at the factory, with the exception of a few components to protect them from
damage during shipping. Follow the steps below to complete assembly:
Handle Assembly
Align the Handle and Wire Clamp with
the Lower Frame. Slide the Wire Clamp
over the Lower Frame, and the Handle
into the Lower Frame.
Adjust the Handle to a comfortable height
for the operator, and find the hole nearest
this position that aligns with the hole in
the Lower Frame. Insert the Handle
Adjustment Bolts (from kit 33-100157)
through the holes.
Secure the Bolts with the Handle
Adjustment Knobs (from kit 33-100157)
and tighten securely.