Owner`s manual

LOCK
LIGHT
953MM
760CB
SECURITY✚ Keyless Entry:
Enables homeowner to operate garage door opener from outside by entering a
password on a specially designed keyboard. Also can add a temporary password
for visitors or service persons. This temporary password can be limited to a
programmable number of hours or entries.
Extension Brackets:
(Optional) For safety sensor
installation onto the wall or floor.
To order call: 1-800-528-9096
Outside Keylock:
Operates the garage door
automatically from outside when
remote control is not handy.
Outside Quick Release:
Required for a garage with NO
access door. Enables homeowner to
open garage door manually from
outside by disengaging trolley.
950MM
38
940MM
41A5281
Motion Detecting Control Panel:
Multi-function door control with motion
sensor that automatically turns opener
lights on for 5 minutes when it detects a
person entering the garage. Sensor can
be easily deactivated when desired.
935CB
7702CB
Accessories Available For Your Opener
SECURITY✚ Single-Function
Remote Control:
Includes visor clip.
SECURITY✚ Multi-Function
Remote Control:
Includes visor clip.
8 foot Rail Extension Kit:
To allow an 8 foot door to open
fully.
7706CB
Multi-Function Mini Remote
Control:
With key ring and Velcro fastening
strip.
956MM
To Add the Keyless Entry
We recommend that you program your password
before you install the Keyless Entry. You will not need
assistance, and you can test the reception at the
mounting location before installation.
If you have a Multi-Function door control:
1. With the door closed, press the four digit password
desired, then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener lights flash, release all buttons.
If you do not have a Multi-Function door control:
1. Choose a 4-digit password using numbers from 0 to 9
(a number can be used more than once, for example,
4, 0, 4, 1).
2. Press the four buttons for the password, then press and
hold the Enter button. The indicator light on the door
opener panel will blink.
3. Press and release the “Smart” (learn) button on the
opener panel. After the opener lights flash, release the
Enter button.
Test by pressing the password, then press Enter. The door
should begin to move.
Setting a Temporary Password
In addition to your personal entry password which works
at all times, a 4-digit temporary password can be added
for the convenience of visitors or service persons. This
allows authorized persons a way to gain temporary
access.
After a programmed number of hours or number of
accesses, this temporary password expires and will no
longer open the door. The temporary password can be
used to close the door even after it has expired. To set a
temporary password:
1. Press the four buttons for your personal entry password
(not the last temporary password), then press and hold
the
✽ button.
The opener light will blink three times. Release the
button.
2. Press the temporary 4-digit password you have chosen,
then press Enter.
The opener light will blink four times.
3. To set the number of hours this temporary password
will work, press the number of hours (up to 255), then
press
✽.
OR
3. To set the number of times this temporary password
will work, press the number of times (up to 255), then
press
#.
The opener light will blink once when the temporary
password has been learned.
Test by pressing the four buttons for the temporary
password, then press Enter. The door should move. If the
temporary password was set to a certain number of
openings, remember that the test has used up one opening.
To clear the temporary password, repeat steps 1-3, setting
the number of hours or times to 0 in step 3.