Instruction manual
Page 192 MultiRanger 100/200 – INSTRUCTION MANUAL 7ML19981FB06
mmmmm
Parameters
If necessary, enter the Parameter Number to default in the Auxiliary Reading display. That
value will show in the auxiliary reading area by default. Other values are available but will
reset to the parameter defined here.
P731 Auxiliary Reading Key
Enter the Parameter Number whose value is to be displayed in the Auxiliary Reading field
is pressed in the RUN mode. See the
Hand Programmer
section on page 27 for RUN
mode auxiliary readings.
P732 Display Delay
Adjusts the Point Number display scroll speed.
Use this feature to adjust the delay before the display advances to the next Point Number.
Display scrolling is independent from transducer scanning.
P733 Scroll Access
Use this feature to select the parameter scroll access option desired.
Press READING and to tag / untag any accessed parameter. is displayed to
indicate the parameter accessed is tagged.
Primary Index Global
Values
Range: 000 to 999
Preset: Material Reading, P921
Primary Index Global
Values
Range: 0.5 to 10
Preset: 1.5 seconds
Related
•P001 Operation
• P737 Primary Reading
Primary Index Global
Values
0 Off to scroll to all parameters (P001 to P999)
1 * Smart for Quick Start, altered, and tagged parameters
2 Tagged to scroll to operator tagged parameters only
Note: Quick Start parameters (P001 – P007) and those changed from factory
default settings cannot be untagged.
P