SDS

Material Safety Data Sheet
2/3 TC-1059 LDPE 英文 MSDS.docS
6
66
6、
、、
、Spillage
SpillageSpillage
Spillage
In case of spillage/leakage scoop to container to avoid danger of skidding.
7
77
7、
、、
、Han
HanHan
Handling and Storage
7.1 During the processing of the material, avoid inhalation of fumes, or powders, by providing
good ventilation of the workroom and, if necessary, they have to be trapped by intake in an
effective manner. If these measure are taken, traces of aldeydes or ketones which may arise during
the process, will remain under the TLV/TWA value. Avoid dispersion of dust in air to reduce
potential for ignition or explosions.
7.2 Storage: Out of direct sun, in well ventilated, cool and dry places
7.3 fire precautions: Equipment must be earthed, to avoid static electric charges. Any contact with
flame or hot surface must be avoided.
8
88
8、
、、
、Personal Protection
Use gloves, goggles or eyeshade and normal working equipment.
In case of powder, avoid inhalation.
9
99
9、
、、
、Physical and Chemical Properties / Characteristics
Appearance: Solid
Form：Pellet
Colour : Translucent Odor: none
pH value： - Boiling Point / Boiling Range: ℃
Decomposition Temperature：>400℃ Flash Point： 570 ℉ 300 ℃
Test Method：
□ Open Cup ■Close Cup
Autoignition Temperature：ca.340℃ Exposure Limits： - %
Vapor Pressure：-
(Below) mmHg@20℃
Vapor Density： - (Air=1.0)
Specific Gravity：0.910-0.940 g/cm
3
Solubility in Water： negligible
Meltingpoint/ Freezing point:
Volatility:
n-octanol partition coefficient (lgKow):
10
1010
10、
、、
、Stability and Reactivity
Stable and chemically inert at room temperature. Protracted exposure to temperature over 250℃ may
cause resin degradation.
11
1111
11、
、、
、Toxicological Information