Product Manual

320.340.6464
7
TOOLS
PARTS
Connect Wire Harness to Pump by pushing the two-pin terminal
connectors together.
Connect the red clamp to your battery’s positive post and the black
clamp to the negative post.
Connects Sprayer to Battery
11.
None
NOTE: Connecting wire
harness clamps to opposite
posts will cause the Pump to
run backwards.
TOOLS
PARTS
Place the Boom Mounting Bracket in front of the Boom Mounting
Arm with the angled side facing the inside top as shown above.
Insert the Square U-Bolt from behind the Boom Mounting Arm and
attach with included nuts. Tighten with a Socket Wrench.
Attaches Boom Mounting Brackets
9.
TOOLS
PARTS
Line up holes of Boom Assembly with holes of the Boom Mounting
Brackets.
Install with Bolts and Flange Nuts from Boom Assembly. Tighten
with a Socket Wrench
Attaches Boom to Mounting Brackets
12.
NOTE: Reference Boom
Assembly Card for needed
components to install Boom
Assembly to Boom Mounting
Brackets.
Scew the Boom Inlet Hose onto the Boom Shut-Off Valve.
TOOLS
PARTS
10.
Attaches Boom Inlet Hose to Pump
None