Product Manual

320.340.6464
6
TOOLS
PARTS
Place Hose Clamp over the Spray Gun Hose, then push the hose
onto the bottom hose barb of the Pressure Regulator Assembly.
Tighten the 1/2” Hose Clamp with a pliers and place the Spray Gun
in the Spray Gun Bracket.
Wrap Teflon Tap around threads of Pressure Gauge.
Twist Pressure Gauge into top port of the Pressure Regulator
Assembly. Don’t Over-tighten.
TOOLS
PARTS
Attaches Gun Assembly to Sprayer
5. 6.
Attaches the Pressure Gauge
T
E
F
L
O
N
T
A
P
E
TOOLS
PARTS
None
Insert pegs on Boom Mounting Arms into the slots in front
of the Sprayer Tank Handles, and lower into place.
Insert Bolt through Boom Handle and Boom Mounting Arm as
shown above.
Screw Wing Nut onto Bolt, followed by the Hex Nut. Leave room
between each, for later boom removal, as shown to the right.
TOOLS
PARTS
None
Adds Boom Mounting Arms to Sprayer
7. 8.
Adds Boom Mounting Arm Wingnuts