Product Manual

320.340.6464
5
TOOLS
PARTS
None
Press the Drain Cap Gasket into the Drain Cap until fully seated.
Attach the Drain Tether to the top of the Drain Cap.
Locate Sprayer Tank drain outlet.
Place other end of Tether over tank drain outlet.
Thread Drain Cap over drain until hand tight.
TOOLS
PARTS
None
Creates Drain Cap Assembly
1. 2.
Applies Drain Cap to Drain Port
UTV SPRAYER ASSEMBLY
TOOLS
PARTS
None
Thread Tank Lid onto Sprayer Tank. Place Wand Bracket on tank as shown (forked side out).
Insert 3/4” Bolts into open holes and tighten with Socket
Wrench.
TOOLS
PARTS
Installs Tank Lid
3. 4.
Adds Wand Bracket