Assembly Manual

800.825.5397
7
TOOLS
Insert loose wire harness through the Wire Harness Holder. Slip
Wire Harness Holder over tube frame of Sprayer Base Assembly.
Use Phillips Screwdriver to attach Wire Harness Holder to Sprayer
Base Assembly with included screw and nut.
3.
Secures Wire Harness
PARTS
TOOLS
None
Insert the Sprayer Handle into the Sprayer Base Assembly.
Make sure the Sprayer Handle is slipped through the wire clamp
that is attached to Sprayer Base Assembly.
4.
Installs Sprayer Handle on Sprayer
PARTS