23 Industrial Loop Road Paynesville, MN 56362 Phone: 1-800-864-1649 www.master-mfg.com MASTER MANUFACTURING 15/25 GALLON NEW DIRECTION TRAILER SPRAYER Rev 2 Dec.
New Direction Trailer Sprayer Note: Do not return product to the distributor/dealer for warranty work. Call Master Manufacturing at (800) 864-1649 for any warranty work or replacement parts. INTRODUCTION Your Master Manufacturing New Direction Lawn Sprayer has been manufactured to provide years of dependable and efficient use. Proper operation and maintenance will ensure long satisfactory service.
New Direction Trailer Sprayer 4.) Locate the Right axel assembly item 5 (PN 32-100074) and fasten to the right cross bracket Item 2 with two bolts item 13 (PN 33-100116) and nuts item 14 (PN 33-100113). Ensure the correct holes are used in the right axel assembly. Refer to Figure 1 or figure 2 for reference. Tighten securely. Ensure 5.) Locate the left axel assembly item 4 (PN 32-100075) and fasten to the left cross bracket Item 2 with two bolts item 13 (PN 33-100116) and nuts item 14 (PN 33-100113).
New Direction Trailer Sprayer 6.) Place wheel item 8 (PN TWA410/350-4) over axel. Locate washer item 15 (PN 33-100090) and place over left axel item 4. Secure with cotter pin Item 10 (PN 33-100091). Repeat this step to attach wheel item 8 to right axel item 5. Repeat for Left Side 7.) Attach tongue item 3 (PN 32-100076) to center assembly with lock pin item 9 (PN 905PA).
New Direction Trailer Sprayer 8.) Attach stabilizer item 7 (PN 31-100283), boom mount item 6 (PN 31-100279) to center section using bolts item 11 (PN 33-100123) and nuts item 14 (PN 33-100113). Tighten securely. Sprayer Tank mounting 1.) Position sprayer tank over holes in trailer frame. Using the four bolts item 17 and washers item 18 (PN 33-100114 and PN 33-100115), thread all four bolts by hand into the tank. Position tank squarely on frame and tighten bolts securely. Do not over tighten.
New Direction Trailer Sprayer Spray Boom Assembly 1.) Attach the two upright spray boom brackets (PN 31-100160) to your lawn trailer, ATV angle brackets or other application using the four 5/16-18 x 1 bolts (PN 33-100116) and 5/16 nuts (PN 33100113). Adjust bolted holes in order to acquire desired boom height 2.) Attach the spray boom (PN 34-140052) to the upright spray boom brackets using two 5/16-18 x 1 bolts (PN 33-100116) and 5/16 nuts (PN 33-100113). 3.
New Direction Trailer Sprayer 4.) Optimum boom height is 14 to 15 inches above area to be sprayed. Use the location holes in the upright spray boom brackets as adjustments to obtain the optimum spray height. Spray Wand 1.) Attach sprayer wand hose (33-103153-180) to sprayer manifold with hose clamp (SHC-F). Wiring Harness 1.) Operating power is obtained directly from a 12 VDC source. Be sure to connect the red to the positive (+) source and attach the black to the negative (-) source.
New Direction Trailer Sprayer expensive chemicals. After all calibrations have been completed, add water and chemicals to the tank. Always follow chemical manufacturer’s instructions for mixing. CLEANING & STORAGE Most spray materials are highly corrosive. The most important aspect of long dependable service from the sprayer is a thorough cleaning immediately following each use.
New Direction Trailer Sprayer Gallons per Acre, 40" spacing Nozzle part # PSI Flow GPM 4 mph 5 mph 6 mph 7 mph 8 mph 9 mph 10 mph DF2.0 Red colored nozzle 15 20 30 40 60 0.24 0.28 0.35 0.4 0.49 8.9 10.4 13.0 14.9 18.2 7.1 8.3 10.4 11.9 14.6 5.9 6.9 8.7 9.9 12.1 5.1 5.9 7.4 8.5 10.4 4.5 5.2 6.5 7.4 9.1 4.0 4.6 5.8 6.6 8.1 3.6 4.2 5.2 5.9 7.3 DF2.5 Brown colored nozzle 15 20 30 40 60 0.31 0.35 0.43 0.5 0.61 11.5 13.0 16.0 18.6 22.6 9.2 10.4 12.8 14.9 18.1 7.7 8.7 10.6 12.4 15.1 6.
New Direction Trailer Sprayer
New Direction Trailer Sprayer Parts List Figure SSFK-1525ND Item # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Part Number 32-100071 32-100078 32-100076 32-100075 32-100074 31-100279 31-100283 TWA410/350-4 905PA 33-100091 33-100123 33-100122 33-100116 33-100113 33-100090 n/a 33-100114 33-100115 33-100171 Qty 1 2 1 1 1 1 1 2 1 2 2 2 4 8 2 0 4 4 1 Description ASSY, Center, ND Assy, Cross, ND Assy, Tounge, ND Assy, Axel, Left, ND Assy, Axel, Right, ND Mount, boom, ND Post, Stabilizer Tire Wheel Assembl
New Direction Trailer Sprayer Master Manufacturing 15/25 Gallon Spot Sprayer Parts List Ref 1 2 3 4 4 4 5 6 7 8 9 10 11 12 13 14 15 Qty 1 1 1 1 1 1 4 4 2 15 ft 3 1 1 1 1 1 1 18” Part No. 33-103230 TL-6B 33-103234 EF2200 33-103209 33-103232 33-103127 33-103131 A38 33-103153-180 SHC-F 33-103121 SG-4507F SG-45ASSY-18 GC-100-KIT W406-V 3N34 33-103153 Description Tank, 25 gallon Lid, Tank Harness, Wire, SS, Pump, EverFlo, 2.2GPM Pump, Delavan, 2.0GPM Pump, Shurflo, 1.8GPM Screw, Machine, 10-24 x 1”, 1.8 & 2.
New Direction Trailer Sprayer Parts List Figure 34-140052 Item # 1 2 3 4 5 Part Number 8027 NS-50 B12 31-100120 3204-1407 6 7 8 9 10 11 NTL38-C SHC-F W406V C38 B34 T38 Qty 2 2 2 1 1 2 2 6 1 1 1 1 Description Nozzle Nut Nozzle strainer, 50 mesh Nozzle body retaining nut Boom, 7’ (2m) Center hose, rubber, 3/8” x 38” long Nozzle hose, rubber, 3/8” x 19” long Nozzle body, elbow, 3/8” HB Snapper hose clamp “F” Garden hose washer Flat seat 3/8” hose barb Knurled garden hose swivel nut Tee, 3/8” HB
New Direction Trailer Sprayer Item # 1 2 3 4 5 6 7 8 9 10 11 12 Part Number GHV-1-BLK E3412 GCR1214 EL1238 M1238 W406V C38 B34 3204-1407 SHC-F NTL38 B12 Parts List Figure 34-140068 Qty Description 2 Valve, Garden Hose 2 Adaptor, ½” MNPT x ¾” garden hose thread 1 Cross, ½” FMPT, ¼” FNPT 1 Elbow, ½” MNPT x 3/8” HB 1 Adaptor, ½” MNPT x 3/8” MNPT 2 Garden Hose Washer 1 Flat seat 3/8” hose barb 1 Swivel Garden Hose Nut 12” Gates 3/8” Rubber Hose 1 Hose clamp 1 Elb.
New Direction Trailer Sprayer Parts List Figure SSBK-7 Item # 1 2 3 4 5 6 7 Part Number 1124DAB100 34-140068 33-100116 34-140052 DF3.0 33-100113 31-100160 Qty 1 1 6 1 2 6 2 Description Gauge, 100 psi Assembly, Manifold Screw, Cap, 5/16-18 x 1” Assembly, Boom, 7’ (2m) Spray Nozzle, 3.
