Safety Data Sheets (SDSs) Safety Data Sheets (SDSs) Client Foshan Shunde Entitech Battery Co.,Ltd Ganyuan Industrial Zone NO.29, Daliang Town, Foshan City, Guangdong Add. of Client Province Description Lithium and Manganese Dioxide battery Model /Type CR2 Trade Name - Manufacturer Foshan Shunde Entitech Battery Co.,Ltd Add. of Ganyuan Industrial Zone NO.29, Daliang Town, Foshan City, Guangdong Manufacturer Province Battery parameters 3V, 900mAh Weight of Lithium in grams 0.
Safety Data Sheets (SDSs) 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Identifier Product name: Lithium and Manganese Dioxide battery Model: CR2 Other means of identification Synonyms:none Recommended use of the chemical and restrictions on use Recommended Use:Used in portabl electronic equipments; Uses advidsed against: a) Do not dismantle, open or shred batteries. b) Do not expose batteries to heat or fire. Avoid storage in direct sunlight.
Safety Data Sheets (SDSs) 2.
Safety Data Sheets (SDSs) Skin IF ON SKIN: Wash with plenty of water and soap Call a POISON CENTER or doctor if you feel unwell Take off immediately all contaminated clothing and wash it before reuse Precautionary Statements - Storage Store locked up Precautionary Statements - Disposal Dispose of contents/container to an approved waste disposal plant Other information harmful if swallowed. Very toxic to aquatic life with long lasting effects. 3.
Safety Data Sheets (SDSs) Inhalation Move to fresh air. If symptoms persist, call a physician. Ingestion Do NOT induce vomiting. Drink plenty of water. If symptoms persist, call a physician. Most important symptoms and effects, both acute and delayed Swallowing Do not induce vomiting. Get medical attention. Most Important Symptoms/Effects No information available. Indication of any immediate medical attention and special treatment needed Notes to Physician Treat symptomatically 5.
Safety Data Sheets (SDSs) Environmental Precautions Refer to protective measures listed in Sections 7 and 8. Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13. Methods and material for containment and cleaning up Methods for Containment Prevent further leakage or spillage if safe to do so. Methods for Cleaning up Use personal protective equipment. Dam up.
Safety Data Sheets (SDSs) Eyewash stations Ventilation systems Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits. Ensure adequate ventilation. Individual protection measures, such as personal protective equipment Eye/Face Protection: Tightly sealed goggles Body protection: Protective work clothing.
Safety Data Sheets (SDSs) Upper/lower flammability or explosive limits Not determined. Vapor Pressure: Not determined. Vapor Density: Not determined. relative density: Not determined. Solubility in Water: Not determined. Solubility in other solvents Not determined. n-octanol/water partition coefficient Not determined. Auto-ignition temperature Product is not self-igniting. Decomposition temperature Not determined. Odout threshold Not determined. Evaporation rate Not determined.
Safety Data Sheets (SDSs) CMR effects(carcinogenity, mutagenicity and toxicity for reproduction): No information available. 12. Ecological Information Toxicity: Acquatic toxicity: No further relevant information available. Persistence and degradability: No further relevant information available. Bioaccumulative potential: No further relevant information available. Mobility in soil: No further relevant information available. Results of PBT and vPvB assessment PBT: Not applicable. vPvB: Not applicable.
Safety Data Sheets (SDSs) The lithium ion batteries according to Section II of PACKING INSTRUCTION 968, or Section II of PACKING INSTRUCTION 969～970 of the Dangerous Goods regulations 60th Edition may be transported. The packaging shall be adequate to avoid mechanical damage during transport, handling and stacking. The materials and pack design shall be chosen so as to prevent the development of unintentional electrical conduction, corrosion of the terminals and ingress of moisture.
