System information

SECURITY DOOR CONTROLS 3580 Willow Lane
•
Westlake Village, CA 91361
Email: [e-mail]
•
www.sdcsecurity.com
Price List Effective January 1, 2006
15
GRADE 1 ELECTRIFIED CYLINDRICAL LOCKS LSK
SPECIFY MODEL LIST
Function: 7200 series locksets are locked on the outside and unlocked from the exterior by an access control or mechanical key. The inside
lever is always operable for uninhibited egress.
Request-to-Exit Output: Standard with all SDC brand Z7200 locksets. SPDT, 3 Amps @ 30VDC
SPECIFY LEVER TRIM
OPTIONAL CYLINDER and I-CORES Add to List
OPTIONAL STRIKE PLATES Add to List
OPTIONS & ACCESSORIES Add to List
Locks supplied by SDC LIST Lockset provided by customer for electrication
Z7250 SDC Failsafe, with REX Output 396.00 S7250 Schlage, Failsafe 110.00
Z7252 SDC Failsecure, with REX Output 396.00 S7252 Schlage, Failsecure 110.00
ZS7250 Schlage, Failsafe 460.00
ZS7252 Schlage, Failsecure 460.00
SDC Lever Trim Schlage Lever Trim
G Galaxy RHO Rhodes N/C
E Eclipse SPA Sparta N/C
SPECIFY FINISH
C 605 Bright Brass H 613 Oil Rubbed Bronze N/C
D 606 Dull Brass P 625 Bright Chrome N/C
F 611 Bright Bronze Q 626 Dull Chrome N/C
G 612 Dull Bronze N/C
Optional Cylinder
6 PIN Keyed different is standard
6PKA 6 PIN Keyed alike N/C
Interchangeable Core (SDC Brand Locks Only)
IC6P-KA 6 pin I-Core, small format, keyed alike 50.00
IC6P-KD 6 pin I-Core, small format, keyed different 50.00
IC7P-KD 7 pin I-Core, small format, keyed different 50.00
IC7P-KA 7 pin I-Core, small format, keyed alike 50.00
REX For S7200 and ZS7200, request-to-exit output, SPDT, 3 Amps @ 30VDC 76.00
030736-00-70 Drill guide for locating 5/16" thru-bolt holes
25.00
Z7250G
S7250ROH
ZS7250ROH
OPTIONAL LATCH AND BACKSET ASSEMBLIES Add to List
4.875" ANSI strike is standard unless specied otherwise
S2 2.25" ANSI strike with square corners 20.00
S3 2.25" Full lip strike with square corners (for wood frames)
20.00
L75 0.75" Latchbolt assembly (required for pairs of 3 Hr, A label, Fire Rated Doors) 16.00
B2 2.375" backset latch assembly with 0.5625" Latch 20.00
Features
Clutch for vandal resistance
Choice of failsecure or failsafe mode
Dual 12/24 VDC
REX output: Z7200 standard; S and ZS7200 optional
'C' type keyway
Independent lever power return springs
•
•
•
•
•
•
Specications
Dual Voltage, 600/300 mA @ 12/24VDC
Exceeds ANSI A156-2-4000 Grade 1
0.5625" latchbolt
2.75" Backset
4.875 strike ANSI A115.2
•
•
•
•
•
Electrically Controlled Single Point
Locks & Latches, 3 Hr A Label Fire Doors
3773-0324:104
CSFM
I-CORE
S7250SPA
ZS7250SPA
NEW
NEW
Z7250E