System information

SECURITY DOOR CONTROLS 3580 Willow Lane
•
Westlake Village, CA 91361
Email: [e-mail]
•
www.sdcsecurity.com
Price List Effective January 1, 2006
14
Power Transfer Hinge Application
Installed in the center hinge position of the door, PTH Power Transfer Hinges provide the concealed wires required
to transfer power from the frame to electric hardware in the door for control and monitoring capability.
Features
5' Ft Cable
UL10B Listed for 3 Hour Fire Rated Doors.
800,000 cycles. 8 times UL test criteria
Wire Replacement Warranty
•
•
•
•
Consult factory for 3 knuckle, and special size, and heavy weight requirements
PTH SERIES POWER TRANSFER HINGE LSK LIST
Dull Chrome nish is standard as specied by sufx Q.
To specify special nish, designate nish sufx below in lieu of Q.
C 605 Bright brass N/C
H 613 Oil rubbed bronze N/C
P 625 Bright Chrome N/C
SPECIFY FINISH Add to List
OPTIONS
DOOR CORE DRILL KIT NET
The SDC door core drill xture provides the best method of wire preparation for re rated or non re rated
particle lled or solid wood doors to accommodate the installation of electried locksets, exit devices and hinges
while maintaining door integrity and rating
Tested by ITS/ Warnock Hersey for eld drilling of rated doors
Installer may call for inspection of doors to be re-certied after drilling
Allows for drilling from the hinge side without removing the door from the frame
Will drill at 20 degrees from center, up or down, from the hinge to the lock prep on a 3'0" door
Drills doors in 3 minutes
Easy to use, no experience required
Includes special 58 inch evacuator drill bit with custom tool room sharpened end
High speed Delrin bushings ensure long tool life at high speed drilling with little or no noise. Your commercial
customers will love the quiet operation in their ofces
•
•
•
•
•
•
•
•
7000-DF Door Core Drill Fixture 650.00 NET
7000-DB 3/8" Custom Replacement Drill bit 124.00 NET
PTH-4Q Four (4) Conductor Power Transfer Hinge
28 gauge - 1-pair 1 Amp, 1-pair 250 mA
4.5” x 4.5” standard weight, 626 Dull Chrome
150.00
PTH-4Q-DPS Four (4) Conductor Power Transfer Hinge with Door Status Contact
28 gauge - 1-pair 1 Amp, 1-pair 250 mA @ 12/24V AC/DC
Door Status Contact: 250 mA @ 30VDC
4.5” x 4.5” standard weight, 626 Dull Chrome
186.00
PTH-10Q Ten (10) Conductor Power Transfer Hinge
30 gauge - 1-pair 1 Amp, 4-pair 250 mA
4.5” x 4.5” standard weight, 626 Dull Chrome
195.00
PTH-10Q-DPS Ten (10) Conductor Power Transfer Hinge with Door Status Contact
30 gauge - 1-pair 1 Amp, 4-pair 250 mA
Door Status Contact: 250 mA @ 30VDC
4.5” x 4.5” standard weight, 626 Dull Chrome
226.00
Discount Not Applicable
10B Listed For
3 Hrs Fire Rated Doors
PTH x 5 Ft Cable
PTH x 5 Ft Cable
And Door Position Switch
NEW
NEW