Specifications

8
SUPERVISORY SIGNAL DISPLAY
When a single supervisory signal is detected by the system (no fire alarms or
troubles):
1. The SUPV icon will flash, and
2. The LCD display will slowly toggle between the two displays:
Display 1, top row: The word "SUPV" followed by the 3-digit zone number
"ZXXX" (where XXX represents numbers from 001 to 255). The three digits to
the right indicate the event number; in this example the display is "001".
Display 1, bottom row: The DATE in MM/DD/YY format, followed by the Time.
Display 2: Zone number followed by the zone description.
When a supervisory signal is detected by the system (there are no fire alarms)
but there are other conditions on the system (other supervisory signals or
troubles):
1. The SUPV icon will flash and the icons SUPV and/or TROUBLE may be flash-
ing or on steady.
2. The LCD display will indicate the initial supervisory signal, slowly toggling be-
tween the two displays as described at left. The symbol ">" will follow the event
number to indicate additional events / conditions have occurred in the system.
Press NEXT to view subsequent supervisory signals and/or events of lower pri-
ority.
137-WATERFLOW SUPV
3RD FLOOR
SUPV Z137 001
Display slowly scrolls
between these 2 screens
SUPV.
SUPV.
137-WATERFLOW SUPV
3RD FLOOR
SUPV Z137 001>
11/01/12 12:05 AM
Display slowly scrolls
between these 2 screens
SUPV.
SUPV.