Specifications
32
TBL #
FIRE KEYPAD DISPLAY
KEYPAD TROUBLE DESCRIPTION
E31-NNN
SYStrblE31 xxx
MM/DD/YY HH:MM
'FireEzmNoRespTbl'
'E31-NN SERVICE '
Fire Expansion Zone Module response failure. NN = EZM address number (001-031). Check to make sure correct EZM
address jumpers (no duplicates) and wired to Fire bus (not Burg bus).
E32-00
SYStrbl E32 xxx
MM/DD/YY HH:MM
'Fire Keypad Trbl'
'E32-NNN SERVICE '
Fire keypad response failure. NNN is keypad number (address 001-015). Check to make sure correct Keypad address
configured (no duplicates) and wired to Fire bus (not Burg bus).
E33-NNN
SYStrbl E33 xxx
MM/DD/YY HH:MM
'FireEzm Tamper'
'E33-000 SERVICE '
Fire Expansion Zone Module tamper. NN = EZM address number. Check to make sure correct EZM address jumpers (no
duplicates) and wired to Fire bus (not Burg bus). In addition, ensure the module is mounted to the wall correctly and the cover
is in place.
E35-NNN
RlyTbl/ E35 NN
MM/DD/YY HH:MM
NN-XXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
Supervised output trouble. Check the following:
1. NAC’s A-D open, short or overcurrent on output.
2. GEMC-SLC-SOM has open or short.
3. GEMC-SLC-SOM is not powered correctly.
4. GEMC-NAC7L or GEMC-NAC7S NAC outputs 1-4 open, shorted or overcurrent on output.
5. Output is disabled (display will read "RlyDis/ E35 NN".
"NN" is the external output number, followed by a programmed 29-character NAC description (multiple "X" characters).
For Burglary systems, a GEMC-BSLC-RLY is not responding or its relay is not working correctly.
E59-00
SYStrbl E59 xxx
MM/DD/YY HH:MM
'Tcpip Comm Fail '
'E59-NNN SERVICE '
Fail to Communicate with NL-MOD.
Caused by not getting required kiss-off with timeout of NL-MOD after a panel-initiated report has been sent.
This error is reportable. “NNN" is the receiver number (1-3).
E66-00
SYStrbl E66 xxx
MM/DD/YY HH:MM
'CleanSmk'
'E66-NNN XXXXXX'
Wireless or SLC Smoke Detector is indicating it needs to be cleaned or its sensitivity is falling below an acceptable
level. NNN is the associated zone number; XXXXXX is the Device Six-Character ID number.
SYSTEM TROUBLE ERROR CODES