Specifications

28
SYSTEM TROUBLE ERROR CODES
Your control panel is capable of detecting a variety of troubles that may affect system performance. If a trouble is detected, the TROUBLE
icon will flash on the left side of keypad window along with one or more of the following error codes. If the problem is related to a specific
zone or device, the corresponding number will also be indicated. Below is a list of the most common troubles along with the necessary
corrective action, if any. If a message appears that is not listed below, call your security professional for service. When a trouble occurs,
the keypad trouble sounder can be silenced unlocking the keypad, and pressing ACK. or SILENCE. The TROUBLE icon will change from
flashing to steady. If the trouble is cleared, the display may be cleared by pressing RESET. The keypad should return to the system nor-
mal display. Note: If you cannot clear a system trouble yourself, call installing company for service as soon as possible.
TBL #
FIRE KEYPAD DISPLAY
KEYPAD TROUBLE DESCRIPTION
E01-00
SYStrbl E01 xxx
MM/DD/YY HH:MM
'AC Power Failure'
'E01-000 SERVICE '
System AC Power failure/outage. Check blown fuse or circuit breaker.
E02-00
SYStrbl E02 xxx
MM/DD/YY HH:MM
'Battery Trouble '
'E02-000 SERVICE '
System Battery Trouble. Generated when there is either a depleted or damaged battery and/or the battery charging circuit is
not working.
If there has been a recent power failure, the battery may be partially depleted and must be recharged by the control panel.
The control panel performs an automatic test of the battery every 100 seconds, at which time the trouble will clear if the battery
has been recharged and the charging circuit is functioning correctly. See also E63 below, the description for the GEMC-BM/
PS low battery.