Specifications

2
The GEMC-FK1 is the Primary Operator Inter-
face for the fire section of your GEMC Combina-
tion Commercial Fire and Burglary Alarm Sys-
tem. It meets the requirements of NFPA and
UL864 (9th Edition) as the Primary User Inter-
face.
When the system is operating normally with-
out alarms, supervisory conditions or troubles,
the keypad displays "SYSTEM NORMAL" and the
AC ON indicator will be turned on.
The keypad displays the initial highest priority
Event in the following order:
• Fire Alarms
• Supervisory Signals
• Troubles
It has six distinct visual indicators, two LED's
that indicate FIRE alarm and AC ON, and four
LCD icons that indicate SUPV alarm, TROU-
BLE, DISABLED and SILENCED.
To silence outputs, acknowledge events and
to reset the system, the keypad must be
"unlocked" using a programmable code and
manually interrogated.
This booklet contains important information
about the operation of your system with this
GEMC-FK1 Keypad. Read it carefully and keep
it handy for future reference. Check the
Glossary for an explanation of terms that may
be unfamiliar to you.
You may find subjects mentioned in this
booklet that do not apply to your system.
Napco control panels have such a wide variety
of features that few security systems, if any, will
ever need them all. Your alarm professional
has chosen appropriate features for your
particular needs.
INTRODUCTION