Specifications

18
FUNCTION MENU (cont'd)
RE-ENTER NEW CODE
ENTER CODE TO
CHANGE (ENTER)
ENTER NEW CODE
SYSTEM READY
11/01/12 12:09 AM
number of Fire User Codes in a system is determined by the number of codes added
within PCD-Windows Quickloader download software.
Change an existing Fire User Code:
1. As detailed at the beginning of this section, press MENU until this "ENABLE (CHANGE
USER CODE)" selection appears, then press NEXT/YES.
2. The keypad display reads: "ENTER CODE TO CHANGE (ENTER)". Enter the "old" code
you want to change and press ENTER.
3. The keypad display reads: "ENTER NEW CODE". Enter the new code and press EN-
TER.
4. The keypad display reads: "RE-ENTER NEW CODE". To ensure the new code entered
in step 3 is correct, re-enter new code, then press ENTER.
Erase an existing Fire User Code:
Fire User Codes cannot be "erased" from the system using the keypad; instead, simply
"change" the "old" code to a different code using the directions above ("Change an exist-
ing Fire User Code"). Using PCD-Windows Quickloader download software, Fire User
Codes can be erased using the User Assignment screen, User/System Codes tab.
Add a new Fire User Code:
You cannot add new Fire User Codes using the GEMC-FK1 Fire keypad. Instead, use
PCD-Windows Quickloader download software, User Assignment screen, User/System
Codes tab.