Specifications

10
ZONES FAULTED
02 BACK DOOR
BYPASSED
BYPASSED
BYPASSED
02 BACK DOOR
Only persons with authority may "unlock" the keypad, allowing them to affect the operation
of the Fire alarm system. This authority is determined either by a valid 4- through 6-digit
"User Code" or by the use of a momentary or maintained key switch mounted adjacent to
the keypad. Also see note below and ask your Dealer how the system is programmed.
If the keypad is locked, any attempt to view or alter the system status will cause the key-
pad to momentarily display "KEYPAD LOCKED ENTER CODE", and then return to the existing
display.
There are two types of Fire Codes:
Fire User Code Allows the initiation of fire drills, the viewing of all events,
and allows the ACK., SILENCE and RESET buttons to
operate.
Dealer Code Allows all of the User Code operations, plus the ability to
add or change User Codes and to perform a "One Man
Test" of the system. Allows the MENU button to operate.
Unlocking the Keypad*
To unlock the keypad, either enter the User Code or Dealer Code and press ENTER or
use the key to turn the key switch mounted adjacent to the keypad. After approximately 15
minutes of inactivity at the keypad, the keypad will automatically re-lock*. Subsequent sys-
tem interaction will require the system to be unlocked.
KEYPAD UNLOCKED
UNLOCKING THE KEYPAD*
KEYPAD LOCKED
ENTER CODE
SYSTEM NORMAL
11/01/12 12:05 AM
*Note: Your system may be programmed to allow Fire Keypad #1 to remain unlocked continually, allowing standard "User functions" to be executed on this keypad (such
as acknowledging, resetting and silencing alarms, but not including control panel programming changes). In addition, your system may be programmed for all Fire keypads
to allow the SILENCE and RESET keys and the Supplemental Relay Reset key function (pressing and holding the zero keypad key) to be enabled without the need to
unlock the keypad.