Specifications
43
Connecting the telephone to the PABX
Gigaset C330/330 A / CHN en/ A31008-M2307-Y101-1-7619 / Pabx_BS+HS.fm / 22.03.2013
Version 4, 16.09.2005
Connecting the telephone to the PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
guide. The settings can only be made via a
registered handset (
¢ page 29).
Changing the dialling mode
The following dialling modes can be
selected:
u Tone dialling (DTMF)
u Pulse dialling (DP)
§§Menu§§ ¢System Setting ¢ Add.
Features
¢ Dialing Mode
q Select the dialling mode and
press
§OK§.
Setting recall
Recall specifies the flash time (break) used
for tone dialling when a recall (e.g. a consul-
tation call) is activated. Your phone is preset
at the factory for operation on the main con-
nection. For operation on a PABX, you may
have to change this value. Please refer to the
user guide for your PABX.
§§Menu§§ ¢System Setting ¢ Add.
Features
¢ Flash Time
q Select the recall time and press
§OK§.
Possible values are:
80 ms, 100 ms, 120 ms, 180 ms,
250 ms, 300 ms, 600 ms, 800 ms.
Setting an automatic prefix
You can set a prefix which is automatically
added to a phone number with at least 5
digits. This prefix can be used to dial into the
outside line when operating the device on a
PABX. A pause is added automatically after
the prefix.
The number must be dialled in idle mode, i.e.
first
~ then d.
Activating/deactivating the
automatic prefix
§§Menu§§ ¢System Setting ¢Auto Prefix
¢ Activation
q Select On or Off and press §OK§.
Setting the prefix number
§§Menu§§ ¢System Setting ¢Auto Prefix
¢ Prefix No.
~ Enter the prefix number and
press
§OK§.
Example: Auto Prefix = On and set to 65
Temporarily switching to
tone dialling (DTMF)
If your PABX still operates with dial pulsing
(DP), but you need tone dialling for a con-
nection (e.g. to listen to a network mail box)
you must switch to tone dialling for the call.
Requirement: You are conducting a call or
have already dialled an external number.
During the call:
* Press the star key.
After the call is ended, dial pulsing is auto-
matically activated again.
You dial Actually dialled number
1234 1234
12345 65P12345
#12345 65P#12345