Specifications

31
Making calls
Gigaset C330/330 A / CHN en/ A31008-M2307-Y101-1-7619 / HS_telefony.fm / 22.03.2013
Version 4, 16.09.2005
Making calls
If the back light is deactivated (¢page 41)
it is switched on by pressing any key. In this
case the pressed key has no other function.
Making an external call
External calls are calls using the public tele-
phone network.
~d Enter the number and press the
talk key.
Or:
d~ Press the talk key d and then
enter the number.
The number is limited to 24 digits.
You can cancel the dialling operation with
the end call key a.
An ongoing call is indi-
cated by:
You are shown the duration of the call while
the call is in progress.
If the line is in use by the base or another
handset, Line In Use is displayed.
Quick dialling
You can assign a number from the directory
to each of the digit keys 2 to O,
¢ page 39.
When the handset is in idle status:
¤ Press and hold the digit key.
The number is dialled immediately.
Or:
¤ Briefly press the digit key:
Press the display key with number/name
(abbreviated if necessary) to dial the
number.
Ending a call
a Press the end call key.
The end of the call is indi-
cated by:
Accepting a call
The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing talk key c.
You can accept the call by:
¤ Pressing the talk key c.
Or:
¤ Pressing the §Accept§ display key.
If the handset is in the charging cradle and
the Auto Answer function is activated
(
¢ page 41), the handset automatically
answers the call when you remove it from
the charging cradle.
To deactivate the ringtone, press the
§Silence§
display key. You can accept the call as long as
it is displayed on the screen.
Please note
Dialling with the directory (¢ page 36),
call list (
¢ page 38) and redial list
(
¢ page 37) saves you repeatedly key-
ing in phone numbers
æ ç
Please note
If no quick dial number has been stored
on the digit key, the directory opens,
allowing you to assign a number,
¢ page 36.
æç