Specifications

23
Base settings
Gigaset C330/330 A / CHN en/ A31008-M2307-Y101-1-7619 / BS_settings.fm / 22.03.2013
Version 4, 16.09.2005
Base settings
Your telephone is preconfigured, but you
can change the settings to suit your individ-
ual requirements.
Setting the date and time
E Press the key to open the dis-
play menu. The Date/Time sym-
bol flashes.
E Press the key again to start the
date and time settings.
r Press the right/left control key
to change the input position
and correct an entry.
~ Enter the month and day as a
4-digit number via the keypad,
e.g. QO2L for 26/
09/. The date format depends
on your country settings.
~ Enter the hours and minutes in
4-digit format via the keypad,
e.g. QM/5
for 07:15 am.
q Press the up/down key to switch
between the 12- and 24-hour
time formats.
E Press the key to save your set-
tings.
You will hear a confirmation tone and the
display will automatically return to idle
mode.
Setting the earpiece and
speaker volume
You can set the loudspeaker volume for
handsfree talking and the earpiece volume
to five different levels during a call.
Setting the earpiece volume
r Set the earpiece volume; the
level (L1... L5) is displayed.
Setting the speaker volume
r Set the speaker volume; the
level (L1... L5) is displayed.
Setting the ringer
You can set the ringer volume to six different
levels and select a ringtone.
Setting the ringer volume
In idle status:
u / v Press the left or right control
key.
L0....L5 The volume level currently set is
shown. The ringer melody cur-
rently set is replayed.
When the ringer volume is set to L0 (off), L0
is displayed and the
ô
symbol appears in
the display.
The ringer volume can also be adjusted dur-
ing an incoming call, but this setting is not
permanent.
Please note
The displayed format for date and time
depends on your country.