Operating instructions
SHERWOOD LPG PRODUCTS
Instruction Sheets
Kit #6775-60-KIT Contains:
Part Number Description
6775-60
Handwheel, Bonnet, and Stem Assembly
R-6775-60 Instruction Sheet
Handwheel, Bonnet, and Stem Assembly Replacement Instructions
for LP Gas Cylinder Valves 6775-60-KIT —
Instruction Sheet R-6775-60
tLeaking gas can cause fires or explosions
t
Only trained personnel should work on gas systems
tInspect gas systems regularly
tReplace equipment as required
READ THIS INSTRUCTION COMPLETELY BEFORE BEGINNING.
General
This instruction is intended for people familiar with LP gas equipment and
applications. IF YOU ARE NOT FAMILIAR WITH THIS EQUIPMENT — STOP.
The instruction covers the handwheel, bonnet, and stem assembly
replacement for the Sherwood Cylinder valve models listed in Table 1 of the
instruction sheet. Read these instructions completely before beginning. Do
not use these instruction on valves not listed. The valve model number is
either stamped on a wrench flat located on the side of the valve or embossed
into the valve body. Make sure the handwheel, bonnet, and stem assembly is
correct for the valve model. Use no substitutes.
Note the date code stamped on one of the wrench flats. Compare it to the
date code chart on page 13. If the valve is 10 years old or older, replace the
entire valve. Destroy the old valve so it cannot be reused.
Handwheel, Bonnet,
and Stem Assembly
6775-60
All Safe, Inc. 1-866-958-3473