Operating instructions

Bonnet Assembly
#3329-13LH
SHERWOOD LPG PRODUCTS
Instruction Sheets
Kit #3329-13H-KIT Contains:
Part Number Description
3329-13LH
Bonnet Assembly
R-3329 Instruction Sheet
Bonnet Assembly Replacement Instructions
For LP Gas Cylinder Valves 3329-13LH-KIT—
Instruction Sheet R-3329-13LH
tLeaking gas can cause fires or explosions
t
Only trained personnel should work on gas systems
tInspect gas systems regularly
tReplace equipment as required
READ THIS INSTRUCTION COMPLETELY BEFORE BEGINNING.
General
This instruction is intended for people familiar with LP gas equipment and
applications. IF YOU ARE NOT FAMILIAR WITH THIS EQUIPMENT — STOP.
This instruction covers the bonnet replacement for the Sherwood Cylinder
Valve models listed in Table 1 of this instruction sheet. Read these
instructions completely before beginning. Do not use these instructions for
valves and bonnets not listed. The model number is either stamped on a
wrench flat located on the side of the valve or embossed into the valve body.
Make sure the bonnet kit number is correct for the valve model. Use only
Sherwood parts.
Note the date code stamped on one of the wrench flats. Compare it to the
date code chart on page 13. If the valve is 10 years old or older and has
a relief valve, replace the entire valve. Destroy the old valve so it cannot
be reused.
All Safe, Inc. 1-866-958-3473