Operating instructions
SHERWOOD LPG PRODUCTS
Instruction Sheets
Kit #3250-8ALH-KIT Contains:
Part Number Description
3250-8ALH
Bonnet Assembly
R-3250-8ALH Instruction Sheet
Bonnet Assembly Replacement Instructions for LP Gas Cylinder Valves
3250-8ALH-KIT —
Instruction Sheet R-3250-8ALH
tLeaking gas can cause fires or explosions
t
Only trained personnel should work on gas systems
tInspect gas systems regularly
tReplace equipment as required
READ THIS INSTRUCTION COMPLETELY BEFORE BEGINNING.
GENERAL
This instruction is intended for people familiar with LP gas equipment and
applications. IF YOU ARE NOT FAMILIAR WITH THIS EQUIPMENT — STOP.
This instruction covers the bonnet replacement for the Sherwood 3359
Series Cylinder Valve models. Read these instructions completely before
beginning. Do not use these instructions for valves not listed. The valve
model number is either stamped on a wrench flat located on the side of the
valve or embossed into the valve body. Make sure the bonnet kit number is
correct for the valve model. Use no substitutes.
Note the date code stamped on one of the wrench flats. Compare it to the
date code chart on page 13. If the valve is 10 years old or older, replace the
entire valve. Destroy the old valve so it cannot be reused.
BONNET ASSEMBL
3250-8ALH
Bonnet Assembly
#3250-8ALH
All Safe, Inc. 1-866-958-3473