Operating instructions

Filler Gasket
#697-2
E Connector
#623-2
Poppet
#2035A-10
Poppet Spring
#19-1855-12
Body O-Ring
#623-12
Liquid-Level Stem
#1931-24A
Rain Cap
#UT12X
SHERWOOD LPG PRODUCTS
Instruction Sheets
Kit #2035-100-KIT Contains:
Part Number Description
697-2
Filler Gasket
623-2 ACME Connector
623-12 Body O-Ring
2035A-10 Poppet
19-1855-12 Poppet Spring
1931-24A Liquid-Level Stem
UT12X Rain Cap
1570, 272 omniFIT
®
, Loctite
®
R-2035 Instruction Sheet
Filler-Section Replacement Instructions for Model 2035A
Multi-Purpose Cylinder Valves 2035-100-KIT —
Instruction Sheet R-2035
tLeaking gas can cause fires or explosions
t
Only trained personnel should work on gas systems
tInspect gas systems regularly
tReplace equipment as required
READ THIS INSTRUCTION COMPLETELY BEFORE BEGINNING.
General
This instruction is intended for people familiar with LP gas equipment and
applications. IF YOU ARE NOT FAMILIAR WITH THIS EQUIPMENT — STOP.
This instruction covers the filler-section replacement of Sherwood Model
2035A and 2035A250 Multi-Purpose Cylinder Valves using Sherwood Kit
#2035-100-KIT. These valves include a filler section with a 1
3
⁄4" ACME
connector, a pressure-relief device, dual internal check valves (known in
the industry as a “double back-check”), a maximum-liquid-level indicator,
and a vapor service on-off valve. The 2035A valve is used on customer
DOT cylinders up to 420 pounds capacity. The 2035A250 is used only on
100-gallon ASME tanks. Read this instruction completely before beginning.
Make sure the valve model number embossed into the valve body is 2035A
or 2035A250.
Note the date code stamped on one of the wrench flats. Compare it to the
data code chart on page 13. If the valve is 10 years old or older, replace the
entire valve. Destroy the old valve so it cannot be reused.
All Safe, Inc. 1-866-958-3473