Operating instructions

SHERWOOD LPG PRODUCTS
POPPET SPRING
#1876-12
GASKET
#797-2
ACME CONNECTOR
#1876-2
POPPET
#1876-40
BODY O-RING
#G019B
Gasket
#797–2
Instruction Sheets
Kit #1876-100-KIT Contains:
Part Number Description
797-2
Gasket
1876-2 ACME Connector
G019B Body O-Ring
1876-40 Poppet
1876-12 Poppet Spring
1570 or 272 omniFIT
®
or Loctite
®
R-1876 Instruction Sheet
Vapor-Return Replacement Instructions for Model 1876
Vapor-Return Valve 1876-100-KIT —
Instruction Sheet R-1876
tLeaking gas can cause fires or explosions
t
Only trained personnel should work on gas systems
tInspect gas systems regularly
tReplace equipment as required
General
This instruction is intended for people familiar with LP gas equipment and
applications. IF YOU ARE NOT FAMILIAR WITH THIS EQUIPMENT — STOP.
This instruction covers the vapor-return section replacement of Sherwood
Model 1876 Vapor-Return Valve using Kit #1876-100-KIT. The valve cap
and bottom section may be reused if they are in good condition. Read this
instruction completely before beginning.
The 1876 valve includes an excess-flow device that is an integral part of
the valve’s lower section. Parts for the excess-flow device are not field
replaceable.
Make sure model number PV1876 is stamped into the valve body.
READ THIS INSTRUCTION COMPLETELY BEFORE BEGINNING.
ACME Connector
#1876–2
Poppet
#1876–40
Poppet Spring
#1876–12
Body O-Ring
G019B
All Safe, Inc. 1-866-958-3473