Instruction manual

15
lowes.com/masterforge
®
16. Install the side burner shelf
A. Hang the side burner shelf (Z) on the
side shelf brackets on the outside of the
grill head (D) as shown in Fig. 16A.
B. Attach the side burner shelf (Z) using
three 1/4-20 x 1/2 in. screws (BB) and
three lock washers (DD) through the holes
on inside of the grill as shown in Fig. 16B.
Note: DO NOT TIGHTEN THESE
SCREWS YET.
C. Use one 1/4-20 x 1/2 in. screw (BB)to
attach the back lower bracket of the side
shelf to the right cart leg as shown in Fig.
16C.
D. Use two 5/32-32 x 3/8 in. screws (AA)
to attach the front panel of the side shelf to
the control panel as shown in Fig. 16C
Note: Align the side burner shelf and
the control panel and then tighten all of
the shelf screws installed in steps 16B
and 16C.
Hardware Used
Hardware Used