Instruction manual

15
NATURAL GAS CONVERSION
15. Use the 17 x 19 mm wrench (GG) to
remove the hex nut securing the
rotisserie burner orifice and hose
assembly. Detach the assembly from the
bracket. Remove the LP orifice of the
rotisserie burner with the orifice removal
tool (CC) and install the 1.45mm
orifice (FF). Reinstall the orifice and
hose assembly and the rear panel as
stated in Step 14.
Hardware Used
x 1
x 1
x 1
16. Re-install the burners. Make sure the
orifices are aligned with the burners and
the ignition pins are installed in their
original positions. Check for sparks
before operating your grill.
17. Put the flame tamers back in the
firebox, followed by the grids and
warming rack.
17 x 19 mm Wrench
GG
GG
Orifice
Removal Tool
CC
FF
1.45mm Orifice
CCFF
15
16
Warming
Rack
Grids
Flame
Tamer
17