Installation Guide

26
Lowes.com/masterforge
®
OPERATING INSTRUCTIONS
WARNING:
1. Make sure the hood is completely open each time you attempt to light the grill.
Failure to open the hood could lead to delayed ignition resulting in bodily harm.
2. This grill is equipped with a ame observation hole in the side panel. Wear
protective mitts before using the ame observation hole.
CAUTION: It is important to inspect the full length of the gas line hose. If it is evident
there is excessive abrasion or wear, or the hose is cut, the hose must be replaced prior
to the appliance being used.
If required, check your parts list for the proper replacement hose assembly.
CAUTION: The regulator and hose assembly must be routed through the left leg
assembly. Regulator must be locked with regulator hose lock before being
connected with LP tank. See page 18 for detailed assembly instructions.
Checking the Flame
Refer to Fig.31 below (side view of grill) for where to check the ame after the grill is lit.
Make sure you have a stable, mostly blue ame.
Air Shutter Adjustment
The gas burner shutters are adjusted at the factory for your convenience. The settings are:
1/4 in. open for LP gas.
If you desire to ne tune your shutter adjustment (or if your ame is more yellow rather than
blue), please follow this procedure.