Installation Guide

12
Lowes.com/masterforge
®
ASSEMBLY INSTRUCTIONS
9. Install rebox and hood assembly
Set rebox and hood assembly (A)
onto cart. Align the 4 pre-drilled
holes in bottom of rebox and hood
assembly (A) to the pre-drilled holes in
the top of the cart assembly. Using 4
M6 x 12 screws (FF), 4 M6 lock
washers (GG) and 4 M6 spring
washers (HH), secure rebox and
hood assembly (A) to the cart
assembly.
Hardware Used
FF
GG
M6 x 12
Screw
M6
Lock Washer
M6
Spring Washer
HH
x 4
x 4
x 4
10. Install drip tray brackets
Locate the holes at the bottom of
rebox and hood assembly (A). Put
drip tray brackets (J) under the
rebox and hood assembly (A). Align
drip tray brackets (J) with the holes at
the bottom of rebox and hood
assembly (A). Tighten drip tray
brackets with M6 x 12 screws (FF) and
M6 lock washers (GG) and M6 spring
washers (HH) from the top to the
bottom of rebox and hood assembly
(A).
Hardware Used
FF
GG
M6 x 12
Screw
M6
Lock Washer
M6
Spring Washer
HH
x 4
x 4
x 4