Installation Guide

Figure 1a Figure 1b Figure 1c Figure 2a
Figure 3b Figure 4Figure 3aFigure 2b
Tools Required
Safety Considerations & Warnings
1. Use this unit only in the manner intended by GAF.
If you have any installation questions, please contact
Master Flow
®
Technical Services at 1-800-211-9612.
2. For rooftop or outdoor use only.
3. Do NOT use on roofs having a slope less than 2:12.
4. During installation, always wear appropriate safety
glasses, gloves, hard hats, restraints, and other safety
equipment to avoid injury. Warning: Always wear
durable work gloves when handling this unit.
5. Installation work should be done by a qualied person
in accordance with all local building codes.
6. Inspect for hidden utilities before cutting or drilling. Do
NOT damage electrical wiring or other hidden utilities
when cutting or drilling.
• Drill
• Extension Cord
•
1
/
8
" Drill Bit
•
7
/
16
" Socket or Adjustable Wrench
• Utility Knife
• Power Saber or Jig Saw and Hand Saw
• Safety Eyewear
• Hard Hat and Other Safety Equipment
• Fall Restraint Equipment
• Galvanized Roong Nails
• Caulking Gun
• Urethane Sealant or Roong Cement
• Gloves
• Ladder
• Claw Hammer
• Flat Blade Screwdriver
• Pencil or Marker
• Tape Measure
Interior
Rafters
Always read and observe safety considerations and installation instructions.
ATTIC EXHAUST VENT
High-Capacity Dome Vent
Installation Instructions
For High-Capacity
Dome Vent
15" (381 mm)
15" (381 mm)