Installation & Assembly

TP4115 47 • Master Equipment
Bathe & Go Grooming Tub
Assembly Instructions
Parts List
(A) Plastic Tee Joints (4)
(B) Leg Levelers (4)
(C) Drain Hose (1)
(D) Legs (4)
(E) Cross Bars, Long (2)
(F) Cross Bars, Short (2)
(G) Drain (1)
(H) Eye Bolts (3)
(I) Washers (6)
(J) Lock Washers (3)
(K) Nuts (3)
(L) Tub Basin (1)
Tools Required:
Allen Wrench (Included)
Adjustable Wrench (Not Included)
A
B
J
I
H
K
C D E
F
G
L
Finished Assembly
1. Attach the four Plastic Tee
Joints (A) to the ends of
the Short Cross Bars (F).
2. Attach the four Plastic Tee Joints (A) to the ends of the
Long Cross Bars (E).
3. Insert the four Legs (D) into the four Plastic Tee Joints (A).
4. Adjust the Plastic Tee
Joints (A) to the proper
height and tighten
them, using the allen
wrench provided.
5. Attach the base structure
to the Tub Basin (L) and
tighten the Legs (D). Attach
the Leg Levelers (B) to the
Legs (D).
6. Connect the
Drain Hose (C)
to the Drain (G).
7. Slide Eye Bolt (H) through Washer (I),
then insert into one of the three holes at
the rounded end of the Tub Basin (L) from
the inside. Slide Washer (I) and
Lock Washer (J) over the end of the
installed Eye Bolt (H). Screw Nut (K) onto
the end of the installed Eye Bolt (H) and
use an adjustable wrench to tighten
until secure. Repeat step for remaining
two holes.
TIPS:
1. Do not place the tub near or in fire, to prevent melting or distortion.
2. Store the tub in a cool, dry place.
3. This tub is for bathing pets only.
LIMITED WARRANTY
_______________________________
Date Purchased: TP4115 47 Master Equipment™ Bathe & Go Grooming Tub
This Master Equipment™ Bathe & Go Grooming Tub is warranted against defective material or workmanship for one year from the date of purchase. Any Master Equipment™
product that is determined to be defective in material or workmanship during the warranty period will be replaced without cost to the purchaser for parts or labor. Please contact
PetEdge Customer Service at 1-800-638-5754 regarding any defective product. PetEdge will not be liable under this warranty for any defect, failure, or malfunction of this product
caused by normal wear, abuse, misuse, or unauthorized adjustments or repairs. PetEdge will not be liable for any incidental or consequential damages of any type. Any implied
warranty is limited to the one-year period provided in this express warranty. Some states do not allow limitations on how long an implied warranty lasts or exclusion or limitation of
incidental or consequential damages, so the above limitations or exclusions may not apply to you. Warranty is void if product has been modified in any manner, repaired by anyone
other than PetEdge, or has been subject to unreasonable use. Warranty is valid in the United States.
Manufactured for / Fabricado para / Fabriqué pour
©Tops Pet Products, Beverly, MA 01915
Manufactured in / Fabricado en China / Fabriqué en Chine
CARE INSTRUCTIONS
Rinse thoroughly after bathing pet. Make sure tub is clean and dry after use. Do not use harsh or abrasive cleaners, bleach, or tools with metal or textured parts, as these can scratch
or damage the tub.