Installation & Assembly

F
Part list:
A) Dryer hose bracket (1)
B) Small screws (2)
C) Plastic screw anchors (4)
D) Large screws (4)
E) Large metal bracket (1)
F) Small metal bracket (1)
3. Line up and attach the dryer to the metal brackets.
4. Turn the safety mechanism (on the dryer) clockwise
to secure it to the mount.
5. Dryer hose attachment
easily fits into dryer
hose bracket.
TP4792 FlashDry Wall Mount Assembly Instruction
LIMITED WARRANTY
This Master Equipment™ FlashDry Wall Mount is warranted against defective material or workmanship for one year from the date of purchase. Any Master Equipment™ product that
is determined to be defective in material or workmanship during the warranty period will be replaced without cost to the purchaser for parts or labor. Please contact PetEdge
Customer Service at 1-800-638-5754 regarding any defective product. PetEdge will not be liable under this warranty for any defect, failure or malfunction of this product caused by
normal wear, abuse, misuse, unauthorized adjustments or repairs. PetEdge will not be liable for any incidental or consequential damages of any type. Any implied warranty is limited
to the one-year period provided in this express warranty. Some states do not allow limitations on how long an implied warranty lasts or exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. Warranty is void if product has been modified in any manner, repaired by anyone other than
PetEdge or has been subject to unreasonable use. Warranty is valid in the United States.
Date of Purchase _______________________ Model # _________________________
2. Find the dryer hose bracket (A) and attach it to the
large metal bracket (E). Secure with the small screws (B).
1. Attach the large metal bracket (E) to the wall (at the appropriate
height) using the large screws (C) with the plastic screw anchors (D).
You will need to first mark your two holes on the wall and then drill
the holes so that the plastic screw anchors (D) can be placed within.
Repeat the same action as above with the small metal bracket (F).