USER MANUAL – MW65 ACTIVE NOISE-CANCELLING WIRELESS OVER-EAR HEADPHONES Master & Dynamic is a New York City-based premium audio company with a deep passion for building technically sophisticated sound tools. Designed to be modern yet timeless, our products utilize only the finest materials and are engineered to last, creating the perfect balance of aesthetics, strength, comfort, and exceptional sound.
OVERVIEW 1. Premium Leather Headphone Band with Lambskin Interior 6. USB-C Input 7. Active Noise-Cancelling Button 2. Replaceable Memory Foam Ear Pads with Lambskin Covering 3. Forged Aluminum Components 8. Dual Microphones 9. Get Help on-the-go from your Google Assistant 4. 3.5mm Passive Audio Input 1 5. Stainless Steel Adjustment Arm 5 10. Headphone Controls (See Page 4 for Details) SPECS 3 7 8 6 USER MANUAL 2 DIMENSIONS 165mm x 190mm x 66mm IMPEDENCE 32 Ohms 9/10 WEIGHT 250g / 8.
ADJUSTABILITY, FIT AND COMFORT • Rotates for comfort around neck USER MANUAL • Adjust to find optimal fit.
FUNCTIONS Pairing Indicator Bluetooth Pairing Switch Power On Power Off Active Noise Canceling (ANC) Button PRESS to switch between modes Battery Level Indicator High Headphone Audio Input Med USER MANUAL Low Vol + LONG PRESS: receive your Google Assistant notifications Play/Pause Answer/End Call 2X: Skip Forward 3X: Skip Back LONG PRESS: Google Assistant / Voice Assistant Vol LONG PRESS: Stop Google USB-C Charging Fully Charged MW65 Active Noise-Cancelling Wireless Over-Ear Heaphones 4
TURN ON PAIRING • Silde to ON position. At startup battery status is displayed (LOW/MED/HIGH) Step 1 CHARGE Hold in position for 2 or more seconds, white light will pulse when headphone is in pairing mode. Release. • To charge, plug in the USB-C Connector and connect to a USB-C port (or USB-A port using the included adaptor) Pairing Step 2 Access Bluetooth settings on your source device. Locate “M&D MW65 and connect. A solid light indicates you are connected.
PASSIVE AUDIO MODE ACTIVE NOISE-CANCELING (ANC) MODES • Plug 3.5mm audio plug into headphone audio input to engage passive (wired) audio The MW65 features 2 Active Noise-Cancelling (ANC) modes for clear, expansive sound in any environment. • Headphones power off when audio cable is plugged in High - Airplanes, City Streets etc.
ACCESSORIES REPLACING EAR PADS Airplane Adapter USB Adapter Headphone Pouch USB-C Chargign Cable 1.25m Standard 3.5mm Cable USER MANUAL • To remove ear pads: gently pull the earpads from the top. The snaps will release. • To re-attach ear pads: hook the 2 catches into the slots at the bottom of the earcup.
MAINTENANCE + TROUBLESHOOTING Clean ear pads and headphones with soft, slightly damp cloth. Do not soak, submerge or allow moisture to enter near the drivers or cable jacks. Ear pads and cables can be purchased if they are worn out at: www.masterdynamic.com Do not drop, sit on, or allow the headphones to be exposed to water, moisture, or temperature extremes. The headphones and device do not pair: 1. Make sure the headphones are not connected to the charger. Cycle power switch off and on. 2.
PREVENTION OF NOISE-INDUCED HEARING LOSS NIHL is a preventable condition caused by both one-time and extended exposure to excessive decibel (dB) levels. This harm to sensitive inner ear structures is irreversible and people of all ages can be affected. Damage can happen in a single event or gradually over time. One-time exposure to sounds louder than 110 decibels and extended exposure to sounds over 85 decibels can cause harm.
WARRANTY + CUSTOMER SERVICE Master & Dynamic guarantees this product against defects in materials or workmanship for a period of two years from the date of original purchase on our website or from an authorized Master & Dynamic retailer or reseller. As an exception to this warranty period, batteries are guaranteed for proper functioning without performance deterioration, for a period of one year from the date of original purchase.
